Scorpion 10

Jacksons Fencing


  • Anti-cut, anti-climb design.
  • 60 x 15 x 5.5mm steel mesh to front and 15 x 60 x 5.5mm mesh to the rear, bolted together to 2400mm above ground with a single layer mesh above 2400 to the extent of the fence height (or 300mm below overall fence height).
  • Mesh is mechanically affixed to posts with bolted 30mm x 5mm steel clamp bars
  • Featuring 20no. Vertical steel pales and 9 horizontal pales incorporating enhanced cut-delay technology.
  • Finishing: Galvanized wire mesh to BS EN 10244-2:2009 class D (minimum Zinc weight 80g/m2). Posts, pales, clamp bars and fixings are hot dip galvanized to BS EN ISO14061. All surfaces finished with Plascoat PPA571 Marine coating to an average coating thickness of 200 microns.
  • BRE Global Classification: Over 10 minute’s penetration resistance.( test exceed 13mn)
  • Visibility Index 45%
  • Bullet proof and explosive proof
  • Reinforced with anti-ram  vehicle h 60cm / 4000lbs / 20mph /


Product Details

Scorpion 10 is a completely new fencing system developed to meet stringent criteria, offering enhanced levels of security and high visibility to be deployed in the protection of sensitive sites.

The innovative design solution comprising of three different fence types were tested under controlled conditions by BRE Global employing a “physical security attack team” in accordance with the requirements specified in BS EN ISO/IEC 17025 (General Requirements for the competence of testing and calibration laboratories) and subsequently classified surpassing the required penetration resistance at 10 minutes respectively.


Drawings Download
Datasheet Download

The Scorpion 10 fence from Jacksons Fencing was checked and certified by GSS security experts to be compliant with:

  • HCIS 2017 standards (Class-1 to 4)
  • ROP standards


Related Products

If you have any questions, comments or concerns, please contact theGulf Security and Safety at
Quick Contact
Email Us

Skype Call/Chat